Isoquick is an insulated raft foundation system for self builders, architects and developers who want a warm, low energy home from the ground up.
The concrete slab sits inside a continuous tray of high-strength EPS insulation, so the floor and its edges are wrapped in one unbroken layer. Isoquick is a certified Passivhaus component, holds aKIWA BDA Agrément certificate and is supplied in the UK by Build Homes Better Ltd. See it for yourself on our stand TV 44 and in the New Build Zone at the National Self Build & Renovation Centre, Swindon.
What is an insulated raft foundation?
An insulated raft foundation is a reinforced concrete slab cast on top of, and inside, a layer of structural insulation. It replaces trench footings, blockwork and a separate floor slab with a single element that is foundation, ground floor and insulation in one.
Because the insulation runs under the slab and up its edges, it meets the wall insulation without a gap. That removes the cold bridge at the wall-to-floor junction, where conventional foundations lose the most heat. You may also see this type of foundation called a Passiv-raft.
Why self builders choose Isoquick
- Passivhaus performance - Floor U-values are typically 0.13 W/m²K with 200mm of Isoquick, and as low as 0.08 W/m²K at the highest specification.
- Experienced practical and technical support - With more than 15 years of UK projects behind us, working alongside some of the biggest names in UK construction, the Isoquick team will help you get it right first time.
- Independently certified - Isoquick is a Passivhaus Institute certified component and aKIWA assessed construction system (Agrément certificate BAF-20-179-S-A).
- Works with your wall system - Timber frame, SIPs, ICF, brick and block, and other modern methods of construction.
- A solution for brick outer leaves - Our certified brick support detail carries a masonry outer skin without breaking the insulation.
- Fast and simple on site - Edge components arrive factory-cut and numbered, with an installation plan. The insulation for a typical house can be assembled in as little as two hours on a prepared sub-base, with no specialist labour.
- Made in the UK
What we do for your project
Every Isoquick foundation is designed for the individual building. We work with your architect and structural engineer to produce the system layout and thermal specification.
Don't have an engineer on board? We have a network of experienced engineers ready to help. We'll then supply the junction details, installation guide and a project-specific U-value report. For Passivhaus projects we provide the thermal data your certifier needs for PHPP.
Once on site, we're there to lead you through the install process, working hands-on with you to get it right first time, quickly and efficiently.
Visit the Isoquick stand at the NSBRC
Find us at Stand TV 44 and in the New Build Zone. You can see a full-size section of an Isoquick foundation and follow the build sequence from sub-base to finished slab. Bring your drawings if you have them, and send us an enquiry using the form on this page for a project-specific quotation.
The NSBRC is at Lydiard Fields, Great Western Way, Swindon SN5 8UB, just off Junction 16 of the M4. Entry is free. The centre is open Tuesday to Saturday 10am to 5.30pm and Sunday 10am to 4.30pm.
Frequently asked questions
Is Isoquick suitable for a Passivhaus?
Yes. Isoquick is a certified Passivhaus component, verified by the Passivhaus Institute, and is used on certified Passivhaus and other low energy homes across the UK.
Which types of wall can be built on an Isoquick raft?
Isoquick suits timber frame, SIPs ,ICF, brick and block, and other modern methods of construction. A certified brick support detail is available for homes with a masonry outer leaf.
Is Isoquick accepted by building control and warranty providers?
Yes. Isoquick holds aKIWA BDA Agrément certificate, which gives building control bodies and warranty providers independent evidence of its performance.
Do I still need a structural engineer?
Yes. The slab and its reinforcement are designed by a qualified structural engineer for your site and building. We can arrange the engineering for you or work alongside your engineer to match the insulation layout to their design.
How long does an Isoquick foundation take to install?
The insulation formwork for atypical house can be assembled in as little as two hours once the sub-base is prepared. Reinforcement and the concrete pour follow as separate stages.
How much does an insulated raft foundation cost?
Cost depends on the size, shape and ground conditions of your project, so we quote from your drawings. An insulated raft combines footings, floor slab and floor insulation in one operation, so compare it with the total cost of all three.
How do I get a quote?
Use the enquiry form on this page, call 01202 909 105 or visit www.isoquick.co.uk